1300mm coil-to-coil polishing line running at up to 60 m/min, delivering No.4, Scotch-Brite and hairline finishes on stainless steel coil in a single pass.
Need other widths, thicknesses or finishes? Tell us about your project and we will propose the right configuration.
This 1300mm coil-to-coil polishing machine line produces No.4, Scotch-Brite and hairline finishes on stainless steel coil in a single continuous pass. The strip runs continuously through the polishing process, giving a smooth, consistent surface quality on every coil.
Built for the 1300mm width class with a maximum line speed of 60 m/min, the line suits producers who need brushed finishes at production speed without batch-by-batch sheet handling.
The production video shows the line in real operation — the continuous polishing process and the consistent surface achieved across production runs. For wider coil up to 1600mm, see our 1600mm coil-to-coil polishing lines.
Marked parameters are to be confirmed against the technical agreement of each project.
| Parameter | Value |
|---|---|
| Material | Stainless steel coil |
| Working width | 1,300 mm |
| Maximum line speed | 60 m/min |
| Surface finishes | No.4 / Scotch-Brite / Hairline |
| Process | Coil-to-coil continuous polishing |
A maximum line speed of 60 m/min supports high-throughput brushed finishing of stainless steel coil.
No.4, Scotch-Brite and hairline finishes are produced in a single continuous pass through the line.
Stainless Steel Coil Polishing LinesContinuous 1600mm coil-to-coil polishing line producing No.4, Scotch-Brite and hairline finishes on stainless steel coil, with a uniform surface across the full coil width.
Stainless Steel Coil Polishing LinesOil-wet coil-to-coil polishing and grinding line with eight No.4 polishing units and a four-head hairline machine, processing steel coil 0.3–3.0 mm thick at up to 60 m/min.
Stainless Steel Coil Polishing LinesOil-wet coil-to-coil polishing line for 200/300/400 series stainless steel coil 0.5–1.0 mm thick and 300–1,250 mm wide, with CPC entry alignment and EPC recoiling.
Send us your material, width, thickness and desired finish. We will reply with a technical proposal.